Difference between revisions of "Vickers Fire Control Instruments"

From The Dreadnought Project
Jump to navigationJump to search
(Created page with 'Vickers manufactured a variety of Step-by-Step Fire Control Instruments and bells for shipboard communication. The Royal Navy tested and deployed Vickers instruments…')
 
m
Line 2: Line 2:
  
 
==Dial Instruments==
 
==Dial Instruments==
 +
 +
TODO:
 +
* HFCI Plate 6 diagram circuit
 +
* HFCI Plate 7 range tx
 +
* HFCI Plate 8 combined range and def rx
 +
* HFCI Plate 9 check fire switch
 +
* HFCI Plate 10 Cross-connecting gear
  
 
Vickers dial instruments were step-by-step devices.  The range and deflection transmitters had tell-tale receivers built into them to indicate the value, and a single handle by which to drive the value through its range.
 
Vickers dial instruments were step-by-step devices.  The range and deflection transmitters had tell-tale receivers built into them to indicate the value, and a single handle by which to drive the value through its range.
Line 11: Line 18:
 
===Mark I Instruments===
 
===Mark I Instruments===
 
:[[Vickers Mark I Fire Control Instruments|Main article]]
 
:[[Vickers Mark I Fire Control Instruments|Main article]]
 +
TODO:
 +
* HFCI Plate 11 Mark I FTP diagram
 +
* HFCI Plate 12 Mark I FTP tx
  
 
===Mark II Instruments===
 
===Mark II Instruments===
 
:[[Vickers Mark II Fire Control Instruments|Main article]]
 
:[[Vickers Mark II Fire Control Instruments|Main article]]
 +
TODO:
 +
* HFCI Plate 13 Mark II FTP diagram
 +
* HFCI Plate 14 Mark II FTP tx+rx
  
 
===Mark III Instruments===
 
===Mark III Instruments===
 
:[[Vickers Mark III Fire Control Instruments|Main article]]
 
:[[Vickers Mark III Fire Control Instruments|Main article]]
 +
TODO:
 +
* HFCI Plate 15 Mark III FTP
 +
* HFCI Plate 16 Mark III FTP details
  
 
===Mark III* Instruments===
 
===Mark III* Instruments===
Line 32: Line 48:
  
 
==Bibliography==
 
==Bibliography==
<small>
+
{{refbegin}}
 
*{{BibUKARTS1903}}
 
*{{BibUKARTS1903}}
 
*{{BibUKARTS1904}}
 
*{{BibUKARTS1904}}
Line 42: Line 58:
 
*{{BibUKHandbookFireControlInstruments1909}}
 
*{{BibUKHandbookFireControlInstruments1909}}
 
*{{BibUKHandbookFireControlInstruments1914}}  
 
*{{BibUKHandbookFireControlInstruments1914}}  
</small>
+
{{refend}}
  
 
[[Category:Fire Control]]
 
[[Category:Fire Control]]
 
[[Category:Shipboard Equipment]]
 
[[Category:Shipboard Equipment]]

Revision as of 20:53, 2 March 2011

Vickers manufactured a variety of Step-by-Step Fire Control Instruments and bells for shipboard communication. The Royal Navy tested and deployed Vickers instruments in a number of ships, eventually favouring their F.T.P. instruments for use in keeping sights set to the proper range and deflection.

Dial Instruments

TODO:

  • HFCI Plate 6 diagram circuit
  • HFCI Plate 7 range tx
  • HFCI Plate 8 combined range and def rx
  • HFCI Plate 9 check fire switch
  • HFCI Plate 10 Cross-connecting gear

Vickers dial instruments were step-by-step devices. The range and deflection transmitters had tell-tale receivers built into them to indicate the value, and a single handle by which to drive the value through its range.

There were no separate order instruments, but the transmitters featured a 3 position "check fire switch" could be set to "Control Fire" or "Check Fire" to cause the receivers to expose a red or a white disc, respectively. The intermediate position of this switch was labelled "Off" and removed power from the attached instruments entirely.

F.T.P. Instruments

Mark I Instruments

Main article

TODO:

  • HFCI Plate 11 Mark I FTP diagram
  • HFCI Plate 12 Mark I FTP tx

Mark II Instruments

Main article

TODO:

  • HFCI Plate 13 Mark II FTP diagram
  • HFCI Plate 14 Mark II FTP tx+rx

Mark III Instruments

Main article

TODO:

  • HFCI Plate 15 Mark III FTP
  • HFCI Plate 16 Mark III FTP details

Mark III* Instruments

Main article

Mark IV* Instruments

Main article

See Also

Footnotes

Bibliography